Read the comments on the current blog and it may stop you and your hubby from doing that.........It is all about Edison, Tesla, and the not to mention pesticides, mold and other junk that may have contaminated the containers. See (or translate) my article :
La maison-conteneur, bonne ou mauvaise idée?
What's Wrong With Shipping Container Housing? Everything.
All the best
André Fauteux, Editor/Publisher
La Maison du 21e siècle (21st-Century Housing) Magazine
www.facebook.com/maisonsaine 450 745-0609
Andrew Michrowski <email@example.com
I stress that the feed of information from Monsieur André Fauteux states things quite well.
The situation can become intolerable and even unhealthy once the piping, wiring is fitted in and all manner of significant net current and electrostatic effects can augment several issues. The static magnetic and static electric boundary layer effects - which are so well sensed by those who are electro-sensitive, with the addition of pain - are exacerbated when crossing through the indoors/out
Dr. Andrew Michrowski
Planetary Association for Clean Energy, Inc
From EMF Safety Zone: Protection - Education - Consulting <firstname.lastname@example.org> wrote :
I live off the grid, on 4 remote acres. I cook and sleep in a 34' high quality tiny home with solar panels and inverter. The tiny home can also simply be plugged into the electric grid. Being an EMF consultant I am very aware of the EMF situation. Thus, I spend most of my time in a separate office space, which uses only 1 electric outlet in the wall and a Yeti power bank/inverter unit. There is no wiring through the walls of my office at all and I created it that way purposely. When I sleep in the tiny home at night, everything is shut off, no current moving through it at all.
Anyone who tries to live in a tiny home is going to set themselves up for some kind of small or large discomforts with their health and well-being. Most often, in tiny homes, the sleeping loft(s) have wires in the floor under the bed. And even if this is not the case in a particular tiny home style, the walls are so close to each other, one is simply living inside an electrified, close quarters EMF exposure prison.
Again, with full awareness of the situation, I use my tiny home for cooking and sleeping. While sleeping, the electric/solar system is completely disabled. I am lucky enough to have a separated small office space with very little EMF, no electric wiring through the walls at all, which again, I configured purposely in this way.
Tiny homes are not safe in any way. And containers, being metal, as you have stated, must be far worse. The only solution I can provide, which is not a complete solution, is to install Satic Pure Power Plugin devices inside the tiny home or contain home. A minimum of 2 devices. These devices will greatly reduce the dirty electricity (high frequency transient) factor, which is helpful. However, they will not eradicate low level electric and magnetic fields, which are simply the natural consequence of living in an electrified structure. In addition, all circuits in the tiny home or container home need to by shut down when one is sleeping during the night. This would be basic common sense so as to preserve one's health as best they can in a living situation such as this.
Neil Steven Cohen